9 Non-Stress Test Report
Report Recording
•
Manual
–
After Recorder Stop
–
Immediately
–
continued after the report has been recorded.
Average short term variability (STV) value is documented in [bpm] and [ms] if STV is configured as
part of the NST Report. This parameter is not considered as reassuring criteria.
NST Report Status Window
The NST Report window displays a detailed overview of the current NST status for any available
ultrasound fetal heart rate measurement. You can see:
•
NST Status - whether it is ready, ongoing, or the time and date at which it was stopped, or at which
it finished.
•
Runtime - the time that has elapsed since the NST began.
•
Accelerations - the number of FHR accelerations detected so far.
•
Baseline - the average baseline value.
•
Variability - the average variability value.
•
Short Term Variability - the current short term variability (STV) value.
•
Decelerations - the number of FHR decelerations detected so far.
•
FHR Availability - current statistical FHR availability value.
•
Sinusoidal - the current status of sinusoidal rhythm detection.
For criteria not yet met, a white arrow symbol marks the overall status on the top line, and also appear
against every criterion not yet met. A yellow symbol indicates detection of severe or prolonged
decelerations.
The pop-up keys let you perform the following actions:
FHR1
•
Record Report
•
Record Trace
•
usage, the trace recording might be incomplete.
Setup
•
92
. Choose from:
Record Report
- press the
- report is recorded as soon as recorder becomes idle
- If a realtime recording is running, the monitor pauses it. The recording is
FHR2
FHR3
,
,
- switch to the window showing the current NST status for the fetal heart rate.
- prints the NST Report on paper.
- records the trace episode that belongs to the current report. Depending on device
Setup NST Report
- opens the
pop up key to trigger a manual request.
window.