Accessing The Nst Setup Pop-Up Keys - Philips Avalon FM20 Instructions For Use Manual

8 Non-Stress Test Timer

Accessing the NST Setup Pop-up Keys

You control and set up the NST timer (for example, start, stop, or clear the timer, and set the run time)
using a selection of pop-up keys that you access via any one of three possible routes:
• Via the
• Via the
• Via the NST menu entry in the menu that pops-up when you touch the top left-hand corner of the
screen (Route 3).
Via the Timer SmartKey (Route 1)
Press the
controlling/setting up the NST timer appear (see "Pop-up Keys for NST Timer Setup" on
page 88).
Via the Main Setup SmartKey (Route 2)
1 Enter the
Select
2
setting up the NST timer appear (see "Pop-up Keys for NST Timer Setup" on page 88).
Via the NST Field (Route 3)
Select the NST field displayed in the top left-hand corner of the screen (when so configured). The
pop-up keys for controlling/setting up the NST timer appear (see "Pop-up Keys for NST Timer
Setup" on page 88).
Pop-up Keys for NST Timer Setup
Pop-Up Keys Selecting this pop-up key lets you....
Start
start the timer
Stop
stop the timer, allowing either restarting after a pause
Start
(
Setup NST
enter the
run time.
Timer
return to the
88
Timer
SmartKey (Route 1).
Main Setup
SmartKey (Route 2).
Timer
SmartKey
Main Setup
menu using the SmartKey
NST Setup NST
to enter the
Clear
) or clearing ( key).
Setup NST
menu. From here you can set the
Timers
window.
Timers
. The window opens, and the pop-up keys for
.
menu. At the same time, the pop-up keys for controlling/
Comments
This pop-up key is not available with
Route 2, as the
already open.
This pop-up key is not available with
Route 1, as the
already open.
Setup NST
menu is
Timers
window is