When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
Page 4
65BDL3652T/75BDL3652T/86BDL3652T Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center.
Page 5
65BDL3652T/75BDL3652T/86BDL3652T Federal Communications Commission (FCC) Notice (U.S. Only) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 6
65BDL3652T/75BDL3652T/86BDL3652T Taiwan: 低功率電波輻射性電機管理辦法 低功率電波輻射性電機管理辦法 取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象 時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線電 通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。應避免影響附近雷達系統之操作。 FCC/ISED/CE-RED Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5GHz products are restricted to indoor usage only.
Page 7
65BDL3652T/75BDL3652T/86BDL3652T Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
Page 8
65BDL3652T/75BDL3652T/86BDL3652T Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
Page 10
Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
Page 11
For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
65BDL3652T/75BDL3652T/86BDL3652T Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians. •...
Page 13
65BDL3652T/75BDL3652T/86BDL3652T • Place the display vertically and its weight should spread evenly on the surface. • Keep the display in a vertical position when moving it, no bending is allowed.
• Touch USB Power Cord RS232 Cable RS232 Daisy IR Sensor Cable • Touch Pen x 2PCS Chain Cable • Philips logo plate • Cleaning cloth • USB Cover • Cable Clip x 3PCS HDMI Cable DVI Cable Touch USB...
65BDL3652T/75BDL3652T/86BDL3652T 2.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complied with TUV-GS and /or UL1678 standard in North America. 65BDL3652T 75BDL3652T Protective Sheet...
Page 16
65BDL3652T/75BDL3652T/86BDL3652T Caution: To prevent the display from falling: • For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available. For detailed instructions about the installation, refer to the guide provided with the bracket. •...
65BDL3652T/75BDL3652T/86BDL3652T Parts and Functions 3.1. Control Panel ] button Remote control sensor and power status indicator • Receive command signals from the remote control. Turn the display On or put the display to standby mode. • Indicate the operating status of the display: [MUTE] button - Light green when the display is turned On Mute the sound or reactivate sound.
65BDL3652T/75BDL3652T/86BDL3652T 3.2. Input/Output Terminals 65BDL3652T AUDIO LINE USB 3.0 AUDIO LINE OUT AUDIO LINE IN USB 3.0 MICRO SD IR-OUT IR-IN RS232 RS232 RJ45 100-240V HDMI LOOP USB 3.0 C DP IN DP OUT DVI-D OUT DVI-I IN HDMI OUT HDMI1 IN HDMI2 IN 50/60Hz 2.5A...
Page 19
65BDL3652T/75BDL3652T/86BDL3652T 75BDL3652T/86BDL3652T AUDIO LINE USB 3.0 AUDIO LINE OUT AUDIO LINE IN USB 3.0 MICRO SD IR-OUT IR-IN RS232 RS232 RJ45 100-240V HDMI LOOP USB 3.0 C DP IN DP OUT HDMI OUT HDMI1 IN HDMI2 IN DVI-D OUT DVI-I IN 50/60Hz 2.5A 5 6 7 9 10 1112...
Page 20
65BDL3652T/75BDL3652T/86BDL3652T 3.2.1. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace the batteries: 1. Press and then slide the cover to open it. 2. Insert the batteries with the correct polarity (+) and (–). 3.
65BDL3652T/75BDL3652T/86BDL3652T 3.3. Remote Control NAVIGATION buttons 3.3.1. General functions Root Menu: Go to the OSD of Smart picture. Main Menu: Move the selected item up to make adjustment. IR Daisy Chain Menu: Increase the controlled Group ID number. Root Menu: Go to the OSD of Audio source. Main Menu: Move the selected item bar down to make adjustment.
Page 22
65BDL3652T/75BDL3652T/86BDL3652T 3.3.2. ID Remote Control Press the [ID] button and the red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. Press the [ID SET] button again will exit the ID Mode.
Page 23
3. When playing a video or music file, you can press button to pause playing. 4. All media files should be located in the folder of “philips”, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/photo/ music) are named by media types and shouldn’t be changed.
Page 24
65BDL3652T/75BDL3652T/86BDL3652T ] BACK button Return to the previous page or exit from the previous function. ] MUTE button Mute or unmute the sound. The button is only controlled by Scalar. [ ] [ ] [ ] [ ] COLOR buttons [Number/ ID SET/ ENTER] button ID SET and ENTER...
65BDL3652T/75BDL3652T/86BDL3652T 3.4. USB Cover ■ Plug in the USB device and insert the micro SD card. ■ Use the screw provided to fix the USB cover. Maximum suitable USB stick size: 20(W)x10(H)x60(L) mm...
65BDL3652T/75BDL3652T/86BDL3652T Connecting External Equipment 4.1. Connecting External Equipment (Multimedia Player) 4.1.1. Using HDMI video input HDMI IN Multimedia Player [HDMI IN] HDMI Out 4.2. Connecting a PC 4.2.1. Using DVI input [VGA AUDIO IN] Audio Out AUDIO OUT AUDIO IN SPDIF IR-OUT DVI Out...
65BDL3652T/75BDL3652T/86BDL3652T 4.2.3. Using DisplayPort input DisplayPort Out [DisplayPort IN] DP IN 4.3. Connecting Audio Equipment 4.3.1. Connecting an external audio device Audio In [AUDIO OUT] SPEAKER SWITCH AUDIO OUT Stereo Ampli�er AUDIO IN 4.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board.
65BDL3652T/75BDL3652T/86BDL3652T 4.4.2. Digital video connection Connect the [HDMI OUT] connector of DISPLAY 1 to the [HDMI IN] connector of DISPLAY 2. Maximum HDMI daisy-chain connection is 2 sets in total. DISPLAY 1 DISPLAY 2 [HDMI] [HDMI IN] [HDMI OUT] [HDMI IN] Connect the [DisplayPort OUT] connector of DISPLAY 1 to the [DisplayPort IN] connector of DISPLAY 2.
65BDL3652T/75BDL3652T/86BDL3652T NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. 2. IR loop through connection can support up to 9 displays. 3. IR in daisy chain via RS232 connection can support up to 9 displays. 4.6.
65BDL3652T/75BDL3652T/86BDL3652T 4.7. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and Touch the target on the screen with two fingertips held supports the Windows Touch features either by single touch together and move them apart to zoom in (magnify) the or multi-touch operation.
Page 31
65BDL3652T/75BDL3652T/86BDL3652T The multi-touch function is not supported by Mac OS. The OS supported is listed below. Item Description Operating Systems Supported Windows 7, 8/8.1, 10, 11 by Plug-and-Play Single Touch Multi Touch Windows 7, 8/8.1, 10, 11 Mac OSX upward (include) 10.12 Chrome 54+ Supported Modes of Android 4.0+...
65BDL3652T/75BDL3652T/86BDL3652T Operation 2) Present page: NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 5.1. Watch the Connected Video Source 1. Press the [ ] SOURCE button. 2. Press [ ] or [ ] button to select a device, then press [ button.
MON, TUE, WED, THU, FRI, SAT,SUN, Every week : 4. If an empty playlist is chosen, the app will guide you through selecting the media source. ■ Set life cycle. All media files should be placed in /philips/ of root Play list : directory. For example, ■...
Page 34
65BDL3652T/75BDL3652T/86BDL3652T 6. To edit or delete a non-empty playlist, select the desired 8. If “Sort” is selected, you can customize the file order playlist that shows a pencil icon on right side of the file. severally. NOTE: When leaving from this page, all data will be saved automatically.
Page 35
NOTE: If the playlist contains video and music files, the screen becomes black when playing music file. Step 2. Copy “mpplaylistX.txt” to “philips” folder of internal storage. You may use FTP to do this. File path : /storage/emulated/legacy/philips (for DL, PL) Ex.
Page 36
65BDL3652T/75BDL3652T/86BDL3652T Ex. /storage/emulated/legacy/philips/photo/xxx. /storage/emulated/legacy/philips/video/yyy. /storage/emulated/legacy/philips/photo/zzz. Step 4. Start media player app, it will automatically import media player text file. NOTE: Once the playlist file (text) is imported, if user changes playlist via remote control, this change will not be written on playlist text file.
65BDL3652T/75BDL3652T/86BDL3652T 5.5. Browser 4. How to specify the path of the local webpage 4.1 Setting up a html file path Before using this feature, ensure that the system is connected Use “file:///” as a prefix. successfully to the network. 1. Main page of “Browser” App which allows you to make related settings.
Page 38
65BDL3652T/75BDL3652T/86BDL3652T 5.1 Import • Select import. 5.2 Export: • Select the storage where the file will be imported from. Select export • • Select a browser file • Select the storage where the file will be exported to. • Import the browser file and the URL will be listed on the •...
Page 39
65BDL3652T/75BDL3652T/86BDL3652T 6. Press the “OK” button to save the URL record. 8. Press “Settings” then enter next page. 7. If you select a non-empty item from the URL list, a message will appear asking if you want to edit or play the 8.1 Incognito URL.
Page 40
10. How to edit url list via FTP Step 1. Create a text file of media player. File name: bookmarklist.txt. Content: Step 2. Copy bookmarklist.txt to “philips” folder of your internal storage. You may use FTP to do this.
4. If an empty playlist is chosen, the App will guide you Days of the week: through selecting the media source. Set Sunday, Monday, Tuesday, Wednesday, All media files should be placed in /philips/ of root Thursday, Friday, Saturday. directory. Every week:...
Page 42
65BDL3652T/75BDL3652T/86BDL3652T 5. To edit or delete a non-empty playlist, select the desired 7. If “Sort” is selected, you can customize the file order playlist that has a pencil icon on right side of the selected severally. file. 8. Select “Settings” on the main page, there are 2 options 6.
Page 43
65BDL3652T/75BDL3652T/86BDL3652T Step 2. Copy pdfplaylistX.txt to “philips” folder of internal storage. You may use FTP to do this. File path : /storage/emulated/legacy/philips (for DL, Ex. /storage/emulated/legacy/philips/pdfplaylist1. Step 3. Prepare the PDF files in “PDF” folder which is under “Philips” folder of your internal storage.
65BDL3652T/75BDL3652T/86BDL3652T 5.7. CMND & Play 1) Server Setup CMND & Play server address 2) Account Setup CMND & Play account 3) PIN Code Setup CMND & Play PIN code (4) Version There are two options, Ver.2 and Ver.3 Ver. 2 use 2.0/2.2 agreement Ver.
65BDL3652T/75BDL3652T/86BDL3652T 5.8. Side Bar (3) Screenshot: screen capture. Quick info It will display the information about Time, Network and Monitor Information. History Show history app. Back Return to the previous page or exit from the previous function. Hide Hide side bar. Home Open Home.
65BDL3652T/75BDL3652T/86BDL3652T Whiteboard Multi-point writing: support simultaneous writing of 20 points. 6.1. Main page Save: Support saving of three file formats (picture, PDF, whiteboard). Folder: Open the file manager, you can choose the pictures to be inserted into the sketchpad. 6.2.1. Brush 1 Sketchpad area: Display the writing effect of the brush and the insertion effect of the picture.
65BDL3652T/75BDL3652T/86BDL3652T 6.3. Page switch and preview 6.2.3. Background color Provide preselected background colors, textures and Page preview: You can preview all the pages that have been backgrounds can be customized. added. Add Page: Add a blank page to the last page. 6.2.4.
65BDL3652T/75BDL3652T/86BDL3652T 6.5. Exit 6.6.1. Eraser Run in the background: Although you exit from whiteboard mode, it is still running in the background. Exit: Close the whiteboard and exit without saving the current file. Save: You need to save the current file first, then close the whiteboard and exit.
65BDL3652T/75BDL3652T/86BDL3652T File manager Files are displayed in thumbnail mode. Entry: On the Android homepage, click the file manager icon to enter the native file manager. 7.1. File manager Select a file and rename, copy, paste, cut, or delete it. 7.2. Display switch Files are displayed in list mode.
65BDL3652T/75BDL3652T/86BDL3652T Setting Enter the IP address, Netmask, DNS address and gateway manually. Main items: Note: (1)Network & internet Input limitation of IP address, netmask, DNS (2)Security address and gateway address (3)Signage Display (1)Format: number 0-9, decimal point “.” (4)App & notifications (2) Mac Address (5)Display Note:...
Page 51
65BDL3652T/75BDL3652T/86BDL3652T 8.3.1. General Settings [0-9]. Password: The password for login FTP server. Password 1. Signage Display Name length in range 6~20 charters, and only allow [a-z][A-Z] Set PD name “PD_” + Ethernet Mac Address. [0-9]. The password will show “*” only after set up. Note: Storage path: The FTP server will access internal storage only.
Page 52
System supports following proxy type: HTTP, HTTPS, SOCKS4, and SOCKS5. Choose one for your proxy server. 8.3.5.1. Clear Storage The purpose is to clear data in the folder “Philips”. It is divided into 4 modes: (1) Clear all Philips folders.
Page 53
65BDL3652T/75BDL3652T/86BDL3652T Export Signage Display Settings Database will be exported to the folder “Philips” of your USB or SD card. (1) Export database (2) Export 3 party APK to Philips/app/ Note: If the selected storage (USB storage or SD card) does not contain the folder “Philips”, then the system will create it...
Page 54
8.3.5.6. Admin Password This function allows you to copy the media files from the Modify or enable/disable the admin password. folder “Philips” of your source storage (internal, SD card or USB). 8.3.5.7. Touch lock password 1. The following folders will be copied (under the folder...
65BDL3652T/75BDL3652T/86BDL3652T 8.3.7. System updates Disable: The “Exit” icon will appear in the lower left corner of the whiteboard. 1. Local update Settings -> Signage Display -> System updates -> Local 8.3.6.3. Change wallpaper update Change the background image of Home Launcher. System will auto search “update.zip”...
65BDL3652T/75BDL3652T/86BDL3652T 8.6. System View the following information of the system: (1) About (2) Keyboard & inputs (3) Date & time (4) Reset options (5) Developer options 8.7. Quick Info Press “Info + 77” to startup quick info. Quick info will show “Network” and “Monitor Information”. Note: Operation hours: updates every minute.
65BDL3652T/75BDL3652T/86BDL3652T OSD Menu 9.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure is 9.2.1. Picture menu shown below. You can use it as a reference for further adjustment of your display. Brightness Picture 9.1. Navigating the OSD Menu Screen Contrast Audio...
Page 58
65BDL3652T/75BDL3652T/86BDL3652T The options are: {3000K} / {4000K} / {5000K} / {6500K} / Zoom mode {7500K} / {9300K} / {10000K} / {Native} / {User 1} / {User 2}. The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). The Color control 16:9 pictures sometimes have a black band at the top and You can adjust the color tones of the image precisely by...
Page 59
65BDL3652T/75BDL3652T/86BDL3652T Auto Adjust • {Off} - Disable the function and Audio Out Volume will be grayed out. Press “Set” to detect and adjust H position, V position, Clock, Phase automatically. Speaker Setting This item applies to VGA input only. NOTE: Enable/disable speaker.
Page 60
• {On} – Default value. Both Philips logo and Android boot animation will be shown. • {User} – Static Philips logo will not be shown, only user- selected boot animation will be shown in Android settings. Heat status Note: Logo will not be rotated even thought rotation setting is set.
Page 61
65BDL3652T/75BDL3652T/86BDL3652T • {Primary} - Designate this display as the primary display HDMI with One Wire for remote control operation. Only this display can be CEC control. operated by the remote control. (In primary mode, IR key • {Off} - Disable CEC.(Default) will always be processed regardless of the monitor ID/ •...
Page 62
65BDL3652T/75BDL3652T/86BDL3652T Language Advanced option reset Select the language used in the OSD menu. Reset all settings in the Advanced option menu to factory preset values. The options are: English/Español/Français/Italiano/Latviešu/ 1. Press [SET] or [ ] button to enter the submenu. Lietuvių/Nederlands/Norsk bokmål/Polski/Português/ Suomi/Svenska/Türkçe/Pyccкий/...
65BDL3652T/75BDL3652T/86BDL3652T 10. Supported Media Formats USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark M P E G p r o g r a m s t r e a m (.DAT, .VOB, .MPG, .MPEG) MPEG transport stream (.ts) Max Resolution: 1080P@60fps MPEG1/2...
Page 64
65BDL3652T/75BDL3652T/86BDL3652T Image Decode Type Image Codec Photo Decode Encode Channel Remark Max Resolution: 7000 x 7000 JPEG JFIF file format 1.02 File Format: JPG, JPEG The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640 File Format: BMP The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640...
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &...
12.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table.
65BDL3652T/75BDL3652T/86BDL3652T 13. Cleaning and Troubleshooting 13.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
65BDL3652T/75BDL3652T/86BDL3652T 13.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure that the power switch is the display is not switched on.
Page 71
65BDL3652T/75BDL3652T/86BDL3652T How to setup the settings in the menu to Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on control all the monitors at the same time OSD (Advanced option/IR control item), and individually via RC? others set as “Secondary”.
65BDL3652T/75BDL3652T/86BDL3652T 14. Technical Specifications Display: Specifications Item 65BDL3652T 75BDL3652T 86BDL3652T Screen Size (Active Area) 163.9 cm / 64.5 inches 189.3 cm / 74.5 inches 217.4 cm / 85.6 inches Aspect Ratio 16:9 16:9 16:9 Number of pixels 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) Pixel pitch...
Page 73
65BDL3652T/75BDL3652T/86BDL3652T General: Specifications Item 65BDL3652T 75BDL3652T 86BDL3652T Power Input 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz Power Consumption (Max) 350 W 380 W 650 W Power Consumption (typ.) 175 W 190 W 390 W Power Consumption (Standby mode & Off <0.5 W <0.5 W <0.5 W...
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment).
Page 75
Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
Page 76
65BDL3652T/75BDL3652T/86BDL3652T Index Unpacking 10 Unpacking and Installation 10 USB Cover 23 Appendix Warranty Statement 72 Whiteboard 44 Cleaning and Troubleshooting 67 Connecting a PC 24 Connecting Audio Equipment 25 Connecting External Equipment (DVD/VCR/VCD) 24 Control Panel 15 File manager 47 Input Mode 63 Input/Output Terminals 16 IR connection 26...
Page 77
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.