Checking Your Monitor Revision; Preparing To Monitor - Philips Avalon FM20 Instructions For Use Manual

Adjusting the Screen Brightness
Enter the
1
Select
2
Select
3
Select the appropriate setting for the screen brightness. 10 is the brightest, 1 is the least bright.
4
Optimum
Adjusting Touch Tone Volume
The touch tone volume is the tone you hear when you select any field on the monitor screen. To adjust
the touch tone volume,
Enter the
1
Select
2
Select
3
loudest and 1 is the quietest. Selecting zero switches the touch tone volume off.
Setting the Date and Time
Select the date and time screen element from the monitor's info line to enter the
1
menu.
2 Select, in turn, the
Select
3
If connected to a Philips OB TraceVue system, the monitor uses the OB TraceVue system date and
time, including daylight saving time changes.
WARNING
Changing the date and time while the monitor is connected to an OB TraceVue system can result in a
mismatch in the time and date between the monitor and the OB TraceVue system.
When disconnected from AC power, the monitor retains the date and time setting for at least two
months.

Checking Your Monitor Revision

Select
1
From the
2
information.

Preparing to Monitor

Confirm fetal life before you begin fetal monitoring. Familiarize yourself with the basic operation
principles before you start to monitor.
Main Setup
menu by selecting the SmartKey
User Interface
.
Brightness
.
is suitable for most situations.
Main Setup
menu by selecting the SmartKey
User Interface
.
Touch ToneVolume
, then select the appropriate setting for the touch tone volume: 10 is the
Year Month
, ,
Store Date, Time
to change the date and time.
Main Setup Revisions
->
Monitor Revision
menu, select the monitor component for which you need revision
Day Hour
, (in 24 hour format) and
Monitor Revision
to open the
3 Basic Operation
.
.
Date, Time
Minute .
, as necessary
menu.
35