Battery Status Window - Philips Avalon FM20 Instructions For Use Manual

4 Using Batteries (with FM20/30 Battery Option)
Battery Status Indicator
Checking Battery Charge
To check the charge status of a battery, refer to the battery power gauge on the screen or open the
Battery Status
When Battery Lifetime is Expired
When the Lithium Ion battery is aged, either after 3 years from manufacturing date or after 500
charge/discharge cycles, it is recommended to replace the battery. To remind you of this a Battery has
aged, replacement is strongly recommended message will appear in the
This message will only be displayed at the correct time when the date and time on the monitor is
correct. Contact your service personnel.

Battery Status Window

♦ To access the
information on the Screen, or select
Capacity
,
Capacity
,
TimeToEmpty
connection. Note that this time fluctuates depending on the system load (the display brightness and
how many measurements you carry out), and the remaining capacity of the battery.
TimeToFull
tells you how much time is left until the battery is charged to 90%. If >10 hrs is shown here, the
battery may not charge completely when the monitor is in use.
Battery status/malfunction symbols: If a problem is detected with the battery, an INOP may be
issued, and the following symbols are displayed in the
accompanied by a status message providing more details.
Symbols indicating critical situations are colored red.
60
Alternates with the battery gauge on the
Main Screen.
Check in the Battery Status window
to see which status symbol is displayed to
identify the cause.
window.
Battery Status
window and its associated pop-up keys, select the battery status
remaining
tells you how much power is left in the battery.
fullCharge
tells you how much power the battery can hold when fully charged.
tells you approximately how long you can continue to use the monitor without an AC
TimeToEmpty
is shown in place of
Battery Malfunction Indicator
Main Setup Battery
-> .
if the monitor is connected to a power supply, and
Battery Status
The red ! flashes. Critical battery
situation or malfunction. Check
in the Battery Statuswindow
to see which malfunction
indicator is displayed, or refer to
the INOP, to identify the cause.
Battery Status
window.
window, where they may be