Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KaVo SMARTair Evo mobile
Summary of Contents for KaVo SMARTair Evo mobile
- Page 1 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace...
- Page 2 Distributed by: Manufacturer: KaVo Dental GmbH Kaltenbach & Voigt GmbH Bismarckring 39 Bismarckring 39 D-88400 Biberach D-88400 Biberach Phone +49 (0) 7351 56-0 www.kavo.com Fax +49 (0) 7351 56-1488...
-
Page 3: Table Of Contents
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace Contents Contents 1 User instructions ........................ 5 1.1 User guide ........................5 1.1.1 Symbols ......................5 1.1.2 Target group ...................... 5 1.2 Service ......................... 5 1.3 Terms and conditions of warranty..................5 1.4 Transport and storage .................... - Page 4 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace Contents 5.1 Checking the filter bag ....................31 6 Operation..........................32 6.1 Automatic mode ......................32 6.2 Manual mode ........................ 32 6.3 Operation via foot switch ....................34 6.4 Adjust the suction levels ....................34 6.4.1...
-
Page 5: User Instructions
12 months from the date of purchase as confirmed by the sales- person. In case of justified complaints, KaVo will honour its warranty with a free re- placement or repair. The warranty does not cover defects and their consequences that arose or may... -
Page 6: Transport And Storage
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 1 User instructions | 1.4 Transport and storage This notification must be accompanied by a copy of the invoice or delivery note on which the manufacturing number is clearly visible. In addition to the guar- anty, the statutory warranty claims of the purchaser also apply with a warranty period of 12 months. -
Page 7: Information On The Packaging: Storage And Transportation
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 1 User instructions | 1.4 Transport and storage If the packaging is visibly damaged on delivery, please proceed as follows: 1. The recipient of the package must record the loss or damage on the delivery receipt. -
Page 8: Safety
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 2 Safety | 2.1 Description of safety instructions 2 Safety 2.1 Description of safety instructions 2.1.1 Warning symbol Warning symbol 2.1.2 Structure DANGER The introduction describes the type and source of the hazard. -
Page 9: Product-Specific
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 2 Safety | 2.2 Safety Instructions CAUTION Damage by liquids. Faults on electrical components. ▶ Protect openings of the product from any ingress of liquids. ▶ Do not continue using the device and contact Customer Service, if there is any ingress of liquid into the device. -
Page 10: Protective Equipment
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 2 Safety | 2.3 Protective equipment CAUTION Hazardous dusts Injury hazard ▶ Wear personal protective clothing whenever you empty or clean the dust drawer. ▶ Comply with local regulations and accident prevention regulations whenever you dispose of the suctioned material or spent filters. - Page 11 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 2 Safety | 2.4 Disposal of electronic and electrical devices The owner or user of the device will have to bear the cost of disassembly, transportation and packaging. International For country-specific information on disposal, contact your dental supplier.
-
Page 12: Product Description
3.1.2 Indications for use The KaVo product is for vacuuming and separating hazardous dust (with MAK values) and inert dusts and vapours (primarily methyl methacrylate). The use of this KaVo product is not permitted in areas subject to an explosion hazard. Note The KaVo product is not suitable for vacuuming collected dust (such as on the floor). -
Page 13: Delivery Content
The materials are vacuumed with the aid of various collecting elements in ac- cordance with ergonomic regulations. Connectors on suction opening: ▪ SMARTair Evo: suction hoods ▪ SMARTair Evo mobile: suction hoods or direct connection to small devices 3.2 Delivery Content SMARTair Evo mobile SMARTair Evo SMARTair Evo FLEXspace ①... -
Page 14: Device Parts
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.3 Device parts Ultra-fine filter Mat. no. 0.658.9802 User Guide Mat. no. 1.001.9704 3.3 Device parts SMARTair Evo components ① Cover ② Rating plate ③ Connectors ④... -
Page 15: Filter Box
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.4 Filter box SMARTair Evo FLEXspace components ① Cover ② Filter muff ③ Power switch ④ Voltage selection switch ⑤ Snap locks of filter flap ⑥... -
Page 16: Connectors
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.5 Connectors 3.5 Connectors ① Socket for power cable connector ② Fuse for line input (10 A) ③ Socket for connection to equipment ④ Fuse for fan stage 2 (3.15 A) ⑤... -
Page 17: Technical Specifications
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.7 Technical Specifications 3.7 Technical Specifications 3.7.1 Dimensions of SMARTair Evo Weight approx. 18 kg Package SMARTair Evo Length approx. 668 mm Width approx. 409 mm Height approx. -
Page 18: Dimensions Of Smartair Evo Flexspace
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.7 Technical Specifications Package SMARTair Evo mobile Length approx. 668 mm Width approx. 409 mm Height approx. 510 mm Weight with packaging 20.4 kg 3.7.3 Dimensions of SMARTair Evo FLEXspace... - Page 19 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.7 Technical Specifications Electrical system Rated voltage 100 / 115 / 230 V Nominal frequency 50 / 60 Hz Admissible leakage current max 0.5 mA...
-
Page 20: Rating Plates
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.8 Rating plates Transportation and storage conditions Ambient temperature -20 to +55 Relative Humidity 5% to 95% non-condensing Air pressure 700 to 1600 hPa 3.8 Rating plates... -
Page 21: Dust Filtration Test
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 3 Product Description | 3.9 Dust filtration test GOST R mark Disposal note Proper use GS mark HIBC Code Follow the instructions for use 3.9 Dust filtration test DGUV Test mark: Demonstrates compliance with the requirements of "Basic principles for the... -
Page 22: Installation
The SMARTair Evo suction system ② is designed to be installed in support frame ① or system base 5. Set-up site of the SMARTair Evo The SMARTair Evo mobile suction system can be set up upright or on its side. Set-up site of the SMARTair Evo mobile 22 / 46... -
Page 23: Installation Of The Smartair Evo
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.2 Installation of the SMARTair Evo The SMARTair Evo FLEXspace suction system is designed to be incorporated into the FLEXspace workstation. Set-up site of the SMARTair Evo FLEXspace 4.2 Installation of the SMARTair Evo... -
Page 24: Installation Of The Smartair Evo Mobile
▶ Switch the power switch ① to "OFF". ▶ Plug the enclosed power cable ② into the designated connector ③ of the SMARTair Evo mobile and insert the plug into an easily accessible, properly installed (grounded) mains socket. Use an extension cable if needed. -
Page 25: Installation Of The Smartair Evo Flexspace
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.4 Installation of the SMARTair Evo FLEXspace 4.4 Installation of the SMARTair Evo FLEXspace Screw down the housing M5x20 ▶ Remove the cover ②. ▶ Screw the housing ① tight with 4 screws M5 x 20. - Page 26 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.4 Installation of the SMARTair Evo FLEXspace Install the suction hose ▶ Place the blower box ② on the floor. ▶ Attach the suction hose ①.
-
Page 27: Installing The Power Cable
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.5 Installing the power cable Right installation ▶ Remove the rails ④. ▶ Rotate the fan box 180 ▶ Reinstall the rails ④. ▶ Fasten the suction hose at the provided position with a strap ② through the opening ①... -
Page 28: Connecting The Smartair To The Equipment
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.6 Connecting the SMARTair to the equipment ▶ Switch the power switch to "OFF". ▶ Plug the enclosed power cable ② into the designated connector ① of the SMARTair and insert the plug into an easily accessible, properly installed (grounded) mains socket. -
Page 29: Installing The Extraction Hood (Optional)
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.7 Installing the extraction hood (optional) ▶ Connect the equipment (e.g. K-Control) with control output (3.5 mm socket) via control cable (Mat. no. 1.000.7198) ② to the SMARTair. - Page 30 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 4 Installation | 4.7 Installing the extraction hood (optional) SMARTair Evo mobile ▶ Plug the suction hose ① onto the suction socket ② of the SMARTair Evo mobile. ▶ Establish the tube connection to the extraction hood.
-
Page 31: Startup
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 5 Startup | 5.1 Checking the filter bag 5 Startup ▶ Check if the rated voltage and rated frequency match the specifications on the rating plate. ▶ Check if the voltage selection switch is set to the country-specific value. -
Page 32: Operation
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 6 Operation | 6.1 Automatic mode 6 Operation Note The distance between the item generating the dust (such as a cutter) and the intake opening may not exceed 50 mm. - Page 33 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 6 Operation | 6.2 Manual mode Setting-up manual mode ▶ Set the power switch ①, ② or ③ to "ON". ▶ Press button ④ until the "Continuous mode" LED ⑤ is on.
-
Page 34: Operation Via Foot Switch
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 6 Operation | 6.3 Operation via foot switch Display Suction power Malfunction Action The "Suction level The maximum ex- No malfunction Reduce the extrac- display" LEDs ① to traction level has tion level by press- ④... -
Page 35: Recognition Of Software Version And Device Properties
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 6 Operation | 6.5 Setting the response sensitivity ð LEDs ① to ④ flash. ▶ Release the "Plus" ⑥ button. ð Saving of the suction levels is now selected. - Page 36 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 6 Operation | 6.5 Setting the response sensitivity ▶ Press the power switch to switch the suction device on. ▶ Press the "Automatic" button ③ (for approx. 3 seconds), until LEDs ① and ②...
-
Page 37: Cleaning And Servicing
See also: 2 2.3 Protective equipment, Page 10 To guarantee constant readiness for use and maintenance of value of the KaVo product, the recommended servicing must be done. This device contains harmful dust. Only professionals and wearing the appropri- ate protective equipment may empty and service the device including emptying the dust collector. -
Page 38: Servicing
▶ Pull the filter drawer ② or system base ② out and take off the lid, if applic- able. ▶ SMARTair Evo mobile: pull the handle bars ② apart to unlock the snap locks and take off the cover ①. -
Page 39: Changing The Adsorption Filter (Optional Accessory)
7 Cleaning and servicing | 7.2 Servicing ▶ Carefully slide a new filter bag with plastic frame ⑥ onto the filter socket ⑦, in case of the SMARTair Evo mobile affix it with bracket ④ and check if it is properly affixed. - Page 40 Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 7 Cleaning and servicing | 7.2 Servicing Note The ultra-fine filter also needs to be exchanged when the LED "Filter full" in- dicates a malfunction after the filter bag has been changed.
-
Page 41: Safety Checks In Accordance With Iec 62638 (Vde 0701 / 0702)
▪ the applicable accident prevention regulations. The overarching guidelines and/or national laws, national regulations and the rules of technology applicable to this product for start-up and use of the KaVo product for the intended purpose are to be applied and complied with. -
Page 42: Troubleshooting
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 9 Troubleshooting 9 Troubleshooting DANGER Electrical power. Risk of fatal injury. ▶ Have the electrical part of the device repaired and serviced only by profes- sionals or persons trained at the factory who have been advised of the safety instructions. -
Page 43: 10Accessories
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 10 Accessories 10 Accessories Presentation Brief description Mat. No. Foot switch (Mat. no. 1.000.3147) Connection cable K-Control (Mat. no. 1.000.7198) Adsorption filter (Mat. no. 0.658.1861) Ultra-fine filter (Mat. no. 0.658.9802) Filter bag, pack of 5 for all dust suction facilities (Mat. -
Page 44: 11Statement Of Conformance
Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace 11 Statement of conformance | 7.2 Servicing 11 Statement of conformance 44 / 46...
Need help?
Do you have a question about the SMARTair Evo mobile and is the answer not in the manual?
Questions and answers