Wilo -Control SC-Fire Electric A2P Installation And Operating Instructions Manual page 19

Refer to the following table for a description of the individual menu items.
No.
1.1.1.1 Screen
menu/
Menu accessible from the level of access 1
Installation and operating instructions Wilo-SC-Fire Electric A2P
1.1.2 Description
The main screen indicates the status of the unit.
The display constantly switches from one voltage
to another (alternating between L1-L2, L1-L3 and
L2-L3).
When the pump is in operation, the
instantaneous current on the three phases
and the voltages are displayed in turns on
the screen.
"Services" menu
To access level 3 an access code must be entered.
After 5 minutes of inactivity on HMI or after a main
supply malfunction, access is blocked and the code
must be re-entered.
"Malfunctions" menu
English
Parameter range
Factory setting
0...9999
19