Steam Reduction; Oven Interior Lighting - Miele DGC 7845 X Operating And Installation Instructions

Description of the functions

Steam reduction

With steam cooking and Combi mode,
the steam reduction function will switch
on automatically at the end of a cooking
programme which uses a temperature
within a certain temperature range. This
is to prevent a large amount of steam
escaping when the door is opened.
Steam reduction appears in the display.
Steam reduction can be switched off
(see "Settings - Steam reduction").
When steam reduction is switched off, a
large amount of steam will escape when
the door is opened.
34

Oven interior lighting

For energy saving reasons, the oven
interior lighting has been set at the
factory to go out after the programme
has begun.
If you want the lighting to remain on
during cooking, the relevant setting
needs to be changed (see "Settings –
Lighting").
If the door is left open at the end of a
cooking programme, the oven lighting
will switch off automatically after
5 minutes.
The lighting can be switched on for
15 seconds by touching the  sensor
on the control panel.