Miele DGC 7845 X Operating And Installation Instructions page 186

Installation
Fitting the stainless steel hose to the
steam oven
Only use the stainless steel hose
supplied. The stainless steel hose
must not be shortened, extended or
replaced by another hose.
Old or used hoses must not be
connected to the steam oven.
The stainless steel hose must only
be replaced by an original Miele
spare part. A stainless steel hose
which is suitable for use with
drinking water is available to order
from Miele (see back cover for
contact details).
The length of the stainless steel hose
supplied is 2000 mm.
 Remove the cover cap from the
mains water connection at the back
of the steam oven.
 Take the angled end of the stainless
steel hose and check whether there is
a washer. Fit one if necessary.
 Screw the stainless steel hose
coupling nut onto the threaded union.
 Ensure that it is screwed into position
correctly and watertight.
186
Connecting the water supply

Disconnect the steam oven from
the mains electricity supply before
connecting it to the water supply.
Turn off the water supply at the tap
before connecting the steam oven to
the water supply.
The tap must be easily accessible
after the steam oven has been built
in.
To connect the steam oven to the water
supply, a tap with a 3/4" connection is
required.
 Check that a washer is present. Fit
one if necessary.
 Connect the stainless steel hose to
the tap.
 Ensure that it is screwed into position
correctly.
 Turn on the tap slowly and check for
leaks.
Correct the position of the washer
and union if necessary.