Miele DGC 7845 X Operating And Installation Instructions page 23

Fitting and removing the FlexiClip
telescopic runners

Risk of injury caused by hot
surfaces.
The steam oven gets hot during
operation. You could burn yourself
on the heating elements, oven
compartment, shelf runners or
accessories.
Allow the heating elements, oven
compartment, shelf runners and
accessories to cool down before
fitting or removing the FlexiClip
telescopic runners.
The FlexiClip telescopic runners are
fitted in between the two rails that make
up a shelf level.
The FlexiClip telescopic runner with the
Miele logo is fitted on the right.
When fitting or removing the
telescopic runners, do not extend
them.
 Hook the FlexiClip telescopic runner
onto the bottom rail of a shelf level at
the front (1.) and push it along the rail
into the oven interior (2.).
 Then secure the telescopic runner to
the bottom of the two rails as
illustrated (3).
If the FlexiClip telescopic runners are
difficult to pull out after fitting, you
may need to pull firmly on them once
to release them.
To remove a FlexiClip telescopic runner,
proceed as follows:
 Push the FlexiClip telescopic runner
in all the way.
 Remove the FlexiClip telescopic
runner by raising it at the front (1.)
and then pulling it forwards along the
rail of the shelf level and out (2.).
Overview
23