H3C S3100-52P Command Manual page 5

Command Manual – VLAN-VPN
H3C S3100-52P Ethernet Switch
undo vlan-vpn priority inner-priority
View
Ethernet port view
Parameters
inner-priority: 802.1p priority of the inner VLAN tag in a packet. This argument can be in
the range 0 to 7 or a keyword listed in
outer-priority: Priority for the outer VLAN tag in a packet. This argument can be in the
range 0 to 7 or a keyword listed
Table 1-2 Description on 802.1p priority
0
1
2
3
4
5
6
7
Note:
For descriptions on the 802.1p priority values and the keywords listed in
refer to Qos-QoS Profile Operation.
Description
Use the vlan-vpn priority command to configure the mapping between the inner VLAN
priority and the outer VLAN priority. With the mapping configured, a port will
encapsulate a packet with the specified inner tag priority with an outer tag that has the
corresponding priority.
Use the undo vlan-vpn priority command to remove the configuration.
By default, no mapping between the inner tag priority and the outer tag priority is
configured, and the switch uses the priority of the receiving port as the outer tag priority
of packets. For descriptions on receiving port priority, refer to QoS-QoS Profile
Operation.
IP Precedence (decimal)
Chapter 1 VLAN-VPN Configuration Commands
Table 1-2.
Table 1-2.
Best-effort
Background
Spare
Excellent-effort
Controlled-load
Video
Voice
Network-management
1-4
Keyword
Table 1-2,