Boogie Drive
3.14 THERAPY TABLE
The therapy table is attached to the centre column ex works
(standard assembly). However, it can be varied in height
and also attached to the chest truss pad holder.
3.14.1 Standard mounting on the centre column
(1) To adjust the height:
•
Loosen the star screw (A),
•
move the therapy table on the holder (B) along the
centre column
•
and retighten the star screw (A).
(1) To adjust the distance:
•
Loosen the set screws (C),
•
place the therapy table on the holder (D) in the
desired position and
•
retighten the set screws (A).
(1) To adjust the tilt angle:
•
Loosen the clamp lever (E),
•
place the therapy table in the wanted tilt and
•
retighten the clamp lever (E).
3.14.2 Mounting on the chest truss pad holder
(2) To adjust the height:
•
Loosen the set screw (A),
•
move the therapy table on the holder (B) along the
chest truss pad holder and
•
retighten the set screw (A).
(2) To adjust the distance:
•
Loosen the set screw (C),
•
place the therapy table in the wanted distance and
•
retighten the set screw (C).
(2) To adjust the tilt angle:
•
Loosen the clamp lever (D),
•
place the therapy table in the wanted tilt
•
retighten the clamp lever (D).
20
(1)
(E)
(D)
(C)
(A)
(2)
(D)
(A) (C)
(B)
(B)
Need help?
Do you have a question about the Boogie Drive and is the answer not in the manual?