Loading Roll Paper
Buttons that are used in the following settings
Check that . on the screen, and then load the
paper. is displayed on the screen, and then
open the roll paper cover.
Confirm that the adapter holder lock lever is
Slide the roll paper right until it contacts the
adapter guide. Next, following the adapter
guide, slide the roll slowly inside.
Press the ( button on the control panel.
Confirm that Roll Paper or Roll 1 is
highlighted in the display and press the Z
Make sure that the roll paper is free of slack
and the end is not frayed, insert it into the
paper slot, and then pull it out from the front of
Do not touch the paper where it will be printed.
After loading the roll paper, rotate the roll paper
adapters as shown to feed the paper through.