Epson SC-F6300 Operator's Manual page 26

SC-F6300 Series Operator's Guide
K
Fill the ink tank with the ink from the ink pack.
Insert the spout of the ink pack into the ink
tank ink inlet groove and slowly tilt to pour out
the ink.
c
Important:
Use all of the ink in the ink pack for a single
refill.
Do not use the ink in an ink pack to refill
multiple different ink tanks.
This can cause messages from the remaining
ink warning system to not be displayed
properly.
L
Put the ink inlet cap back on the ink tank.
The method for attaching the ink inlet cap
differs depending on the type of ink being
refilled.
Maintenance
Except for High Density Black ink
For High Density Black ink
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into
contact with the ink inlet cap when pulling it
out, the cap could be damaged.
M
Close the ink inlet cover.
26