Reset; Quit - ICP DAS USA PDS-5000 Series User Manual

Programmable Serial-to-Ethernet Device Server

9.3.23 RESET

This command is used to reboot the PDS.
Effect: Immediate
Command Arguments
reset
Figure 9-3.23: The following is an example of a RESET configuration.

9.3.24 QUIT

This command is used to stop and quit the firmware of PDS.
Effect: Immediate
Command Arguments
quit
Figure 9-3.24: The following is an example of a Quit configuration.
Description
Reboot the PDS.
Description
Quits the firmware.
PDS Series User Manual, Version 2.5, Mar. 2019 - 195 -