ICP DAS USA PDS-5000 Series User Manual page 211

Programmable Serial-to-Ethernet Device Server
Step 10: Disconnect the INIT* pin from the GND pin.
Step 11: Execute ping you setting IP (e.g., ping 10.0.8.246 –t) using a run command.
Follow the procedure described
below:
1. Click the "Start" button and then
2. In the "Run Command" dialog
3. Click the "OK" button to open a
4. The ping results should be smooth
PDS Series User Manual, Version 2.5, Mar. 2019
click "Run" to open the "Run
Command" dialog box.
box, type "pin 10.0.8.246 -t" in
the "Open:" field.
Command Prompt window.
and continuous
- 211 -