Hmi Or Es Via Isoprofibus (Optional) - Siemens SIMOTION P320-4 E Manual

Description
2.3 HMI and SIMOTION SCOUT
Using Ethernet, the following services are possible on a SIMOTION device:
● HMI software
WinCC flexible or the OPC server can use Ethernet to access one or more SIMOTION
devices.
● SIMOTION SCOUT Engineering System
SIMOTION SCOUT can also use Ethernet to access one or more SIMOTION devices.
● SIMOTION IT
SIMOTION P320-4 offers communication with standard IT protocols (HTTP) over the
integrated Ethernet interface.
This makes it possible to access data or diagnostic information in the SIMOTION P320-4
from any location via intranet or the Internet.
References
You can find further information in the documentation for SIMOTION IT:
● SIMOTION IT Diagnostics and Configuration
● SIMOTION IT Programming and Web Services
● SIMOTION IT Virtual Machine and Servlets
2.3.5

HMI or ES via IsoPROFIBUS (optional)

Networking via PROFIBUS DP
If you connect a central HMI via PROFIBUS DP, the X101 and X102 interfaces of the
IsoPROFIBUS board are available.
Figure 2-8
34
Model: Networking via PROFIBUS DP
SIMOTION P320-4 E / P320-4 S
Manual, 01/2015