Trace Status - Agilent Technologies PNA Series User And Programming Manual

With Trace Max ON, select a different trace from the Traces softkeys to make that trace visible.
To make all traces visible again select Trace Max OFF
Channels
contain traces. The PNA can have up to 200 independent channels (32 before A.09.00)
Channel settings determine how the trace data is measured . All traces that are assigned to a channel share the
same channel settings. A channel must be selected (active) to modify its settings. To select a channel, click the

Trace Status

button of a Trace in that channel. The following are channel settings:
Frequency range
Power level
Calibration
IF Bandwidth
Number of Points
Sweep Settings
Average
Trigger (some settings are global)
Managing Channels
How to Select a Channel
A channel must be selected (active) before its settings can be changed.
To make a channel active,
How to Turn ON or OFF a Channel
Click Trace/Chan, then Channel, then Turn On / Off Channel.
select a trace in that channel.
105