Measurement Class - Agilent Technologies PNA Series User And Programming Manual

Measurement Classes
Measurement Classes are categories of measurements that can coexist on a channel.
What are Measurement Classes
How to assign a Measurement Class to a Channel
Measurement Class Dialog Box Help
See other 'Setup Measurements' topics
What are Measurement Classes
The following table shows the Measurement Classes currently available for the PNA. Within each of these classes
there are a number of measurements.
Measurement Classes are categories of measurements that can coexist on a channel. A measurement from one
class can NOT reside in a channel with a measurement from another class. For example, a Noise Figure
measurement can NOT reside in a channel that is currently hosting Scalar Mixer Measurements.
The Measurement Class dialog is accessed in the following ways:
How to assign a Measurement Class to a Channel
Using front-panel
[softkey] buttons
HARDKEY
1. Press M
EAS
2. then [Measurement Class]
PNA Menu using a mouse
1. Click Trace/Chan
2. then Measurement Class
142