Table of Contents
Advertisement
3.
Before Installation
3.1
Combination of Outdoor Unit and Indoor Unit
The combination capacity of indoor unit against the outdoor unit is selected depending on the outdoor unit
capacity. Refer to "Installation and Maintenance Manual" for outdoor unit to decide the required combination
of indoor and outdoor units, and the combination unit capacity.
3.2
Transportation and Handling
(1) Transport the product as close to the installation location as possible before unpacking.
(2) Do not lay any objects on the indoor unit.
(3) The indoor unit comes crated upside-down with the foam polystyrene condensate pan positioned on
top.
Do not invert the unit until it is ready to be suspended above the floor. Inverting the unit while on the
floor will crush the condensate pan. Do not handle the unit by grabbing at the polystyrene pan and other
air outlets as they are fragile and will sustain damage.
(4) The indoor unit handle is fabricated from foam polystyrene and is susceptible to breakage if any
excessive force is applied as a result of mishandling of the unit during installation.
P01432Q-rev.1
7
Hide quick links:
Advertisement
Table of Contents
