Preparation Before Installation - York HVHC 07-12DS Installation & Owner's Manual

PREPARATION BEFORE INSTALLATION

• Before doing any work, check the interior power supply cord and the main breaker capacity are sufficient and the
installation area is sufficient and complies with the requirements.
• Check that the power supply available agrees with name plate voltage.
• Electrical work, wiring and cables must be performed in compliance with national and local wiring codes and
standard.
• Do not use the extension cables. In the case extended cables are needed, use the terminal block.
SELECTION OF THE LOCATION
• Select a place which provides the space around the units as shown in the diagram below.
INDOOR UNIT
Models
07
A 12cm
B 70cm
C 12cm
D 15cm
CAUTION
• Do not install in a place that cannot bear the weight of the unit.
OUTDOOR UNIT PICTURES
HVJC 07-12 DS
285
8
ENGLISH
J190
09 12 18
12cm 12cm 12cm
70cm 70cm 70cm
12cm 12cm 12cm
15cm 15cm 15cm
750
62
530 110
8
OUTDOOR UNIT
Models
09
07
A 30cm 30cm
B 200cm 200cm
C 60cm 60cm
D 30cm 30cm
HVJC 18 AS
843
301.5
560.1
141.5
2/03/2005, 4:55 AM
12 18
30cm 30cm
200cm 200cm
60cm 60cm
30cm 30cm
313