Bosch Compress 3000 DW FI Series Installation And Operating Instructions Manual page 22

22 | Operation
"P1" operating time
The heat pump only goes into operation during the operating
times set at the factory. These cannot be changed:
Days 1 - 5: [00:00  06:00] and [16:00  19:00]
Days 6 - 7: [02:00  08:00]
Fig. 28 "P1" operating time
"P2" and "P3" operating times
The heat pump runs according to the operating times set by the
user.
Fig. 29 "P2" and "P3" operating times
Setting the operating times for "P2" and "P3"
4 operating times are set for each function:
• 2 operating times for days 1 to 5
• 2 operating times for days 6 and 7
Setting the operating times
▶ Call up function "P2" or "P3" ( chapter 8.4).
▶ Press "OK".
The start of the first operating time flashes.
Fig. 30 Start of the first operating time
6 720 809 134 (2013/09)
▶ Set the start of the operating time using the "+" and "-"
▶ Press "OK".
▶ Set the run time using the "+" and "-" buttons.
▶ Press "OK".
6720646160-16.1V
Fig. 31 Start of the second operating time
▶ Set the start of the second operating time using the "+" and
▶ Press "OK".
▶ Set the run time using the "+" and "-" buttons.
6720646160-35.1V
▶ Press "OK".
Fig. 32 Start of the first operating time for days 6 and 7
▶ Repeat the steps above for the operating times for days 6
6720646160-39.2V
buttons.
The end of the first operating time flashes.
The start of the second operating time flashes.
If the start of the second operating time is set
so that it is within the first operating time, the
first operating time ends automatically when
the second operating time starts.
"-" buttons.
The end of the second operating time flashes.
The operating time for days 1 to 5 is saved.
and 7.
Once you have set the second operating time for days 6 and 7,
the process of setting the operating times is complete.
6720646160-40.2V
6720646160-41.1V
Compress 3000 DW FII