Powering On The Switch; Verification Before Power-On - HP 1910 Series Getting Started Manual

Powering on the switch

Verification before power-on

Before powering on the switch, verify that:
The power cord is properly connected.
•
• The input power voltage meets the requirement of the switch.
The console cable is properly connected, the terminal or PC used for configuration has started, and
•
the configuration parameters have been correctly set.
Powering on the switch
Power on the switch, for example, an 1910-24-PoE+ switch, and you can see the following information:
Starting......
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/hp1910_24_poe.bin!........
..............
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
HP 1910-24-PoE+ Switch JG5389 BootWare, Version 1.02
: Mar 20 2013 17:00:53
: MIPS4kec
: 16KB
: 500MHz
: DDR3 SDRAM
: 128MB
: 300MHz
: 3MB
: 32MB
5
*
*
*