For safety information and detailed procedures relating to • installation of options, refer to any installation instructions that came with the option, as well as the HP ProLiant SL170z G6 Identifying Chassis Components series Server Maintenance and Service Guide. For safety information and detailed procedures related to the rest •...
ProLiant server, go to http://www.hp.com/go/supportos. Pre- and Post-installation Procedures When installing additional options in your HP ProLiant SL170z G6 Server, observe the following procedures: Pre-installation Procedures Turn off the server and all the peripherals connected to it.
Figure 5 Installing a hard disk drive Installing a Processor The HP ProLiant SL170z G6 server supports Intel Nehalem 5500 Series Processors High Wattage 80W and Intel Xeon 5600 Series Processor High Wattage 130W, and Intel Nehalem 5500 Series Processors Low Wattage 60W and Intel Xeon 5600 Series Processors Low Wattage 40W.
Page 5
IMPORTANT: CAUTION: Be sure the processor remains inside the THE PINS ON THE SYSTEM BOARD ARE VERY processor installation tool. FRAGILE AND EASILY DAMAGED. To avoid damage to the system board: Never install or remove a processor without using the If the processor has separated from the installation tool, carefully •...
To install the heatsink: CAUTION: Heatsink screws should be tightened and loosened For additional documentation, refer to HP ProLiant SL170z G6 Easy in opposite sequence. Do not overtighten the screws as this can Set-up CD. You can also access additional information and damage the system board, connectors, or screws.