HP ProLiant SL170s G6 Maintenance And Service Manual page 45

To remove a memory module:
Completely open the holding clips securing the module.
1.
Gently pull the memory module upward to remove it from the slot.
2.
Figure 24 Removing a memory module
CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.
To install a memory module:
Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and
1.
then press the module fully into the slot.
Firmly press the holding clips inward to secure the memory module in place.
2.
Figure 25 Installing a memory module
The memory slots are structured to ensure proper installation. If you insert a memory module but it
does not fit easily into the slot, you may have inserted it incorrectly. Double-check the orientation of
the module and reinsert. If the holding clips do not close, the module is not inserted correctly.
Removal and replacement procedures 45