Safety Instruction - SMC Networks IZD10-*10 Series Operation Manual

1. Safety Instruction

These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard by labeling "Caution", "Warning", and
"Danger". To ensure safety, be sure to observe ISO4414 and other safety precautions.
Caution ：
!
Warning ：
!
Danger ：
!
Warning
!
(1) The compatibility of pneumatic equipment is the responsibility of the person who designs the
pneumatic system or decides its specifications.
Since the products specified here are used in various operating conditions, their compatibility with
the specific pneumatic system must be based on specifications or after analysis and/or tests to meet
your specific requirements.
(2) Only trained personnel should operate pneumatically operated machinery and equipment.
Mounting of the sensor and maintenance shall be performed by person with adequate knowledge
and experience.
(3) Do not service machinery/equipment or attempt to remove components until safety is confirmed.
1) Inspection and maintenance of machinery/equipment should only be performed after
confirmation of safe locked out control positions.
2) When equipment is to be removed, confirm the safety process as mentioned above.
pressure supply for the equipment and exhaust all residual compressed air in the system.
3) Before machinery/equipment is re-started, take measures to prevent quick extensions of the
cylinder piston rod etc.
(2) Contact SMC if the product is to be used in any of the following conditions.
1) Conditions and environments beyond the given specifications or if product is used outdoors.
2) Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles,
medical equipment, food and beverage, recreation equipment, emergency stop circuits, press
applications or safety equipment.
3) An application which has the possibility of having negative effects on people, property, or
animals requiring special safety analysis.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury or damage to the equipment.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
2
Cut the