Vcr, Vcr2, Vcr3 - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

VCR, VCR2, VCR3

KEY DISPLAY FUNCTION
POWER To turn the power on/off
1 – 9, 0, ENTER To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
INPUT To change the input mode
DISPLAY To activate the on-screen
display
ANT/SW To switch the antenna output
MAIN/SUB To switch the sound of the
duplex broadcast
MENU To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
OK To enter the selection of the
MENU display
m To rewind
N To play
M To fast-forward
REC To record, press N while
pressing REC.*
N, then release REC.
x To stop
X To pause
Z To eject a cassette
CHANNEL +/– Channel up: +
Channel down: –
COUNTER To change the counter
display
Q.TIMER To select the recording time
by 30 minutes and begin
recording
TSEARCH REVIEW locked picture
search
SEARCHt CUE locked picture search
COMMERCL To skip over commercials
KEY DISPLAY
SP/LP
H.S.REW
PLAY x2
LINE1
LINE2
DVin
TVTUNER
*
2 First release
FUNCTION
To switch the tape speed
To rewind at high speed
To play at double speed
To select the input source:
LINE 1
To select the input source:
LINE 2
To select the input source: DV
To return to the TV (to reset
the external input)
2 In order to avoid recording by mistake, the
REC key does not work by itself. You can
assign this operation (record) to a single key
using the learning function (page 19).
Continued
91