Programming A Series Of Commands For The System Control Buttons Or The Label Keys - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

Executing a Series of Commands
— System Control Functions
(continued)
Programming a series of
commands for the SYSTEM
CONTROL buttons or the
Label keys
5
3
TV
1
MENU
Example: To program the
procedure above for the SYSTEM
CONTROL 2 button
1
While pressing COMMANDER
OFF, press MUTING.
COMMANDER
OFF
"SET" appears on the Mode Display
key.
32
SET
STB VCR DVD CD AMP OTHER
COMMANDER
SYSTEM CONTROL
TIMER LIGHT
2 3 MORE
VOLUME CHANNEL
OK
EXIT MUTING RECALL
MUTING
2
2
4
3
7
OFF
1
Press the SYSTEM key.
SYSTEM
"SYSTEM" appears on the Mode
Display key.
Select the system number by
pressing the SYSTEM CONTROL
button (in this case, SYSTEM
CONTROL 2) or the Label key.
To change label keys, press the MORE
button repeatedly until you obtain the
desired system number.
Each time you press the MORE
button, the display of the Label keys
changes as follows.
The selected system number is
displayed on the Mode Display key.