Adding An Extra Function To The Component Select Buttons; Programming The Power-On Command Of The Selected Component (For Sony Components Only) - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

Adding an Extra
Function to the
Component Select
Buttons
Programming the Power-On
command of the selected
component (for Sony
components only)
When using Sony components, you can
program the Power-on signal for each
component on a Component Select
button or a Label key. You can select the
desired component and turn it on by just
pressing that Component Select button or
a Label key.
3,4
TV STB
SYSTEM CONTROL
1 2
OK
MENU
VCR DVD CD AMP OTHER
COMMANDER
TIMER LIGHT
OFF
3 MORE
VOLUME CHANNEL
EXIT MUTING RECALL
Example: To program the TV
button
1
While pressing COMMANDER
OFF, press MUTING.
COMMANDER
OFF
"SET" appears on the Mode Display
key.
2
Press the Mode Display key (SET)
twice to display "MODE" on one
of the Label keys on the display.
3
Press the MODE key.
2
"MODE" appears on the Mode
Display key.
5
1
MUTING
Continued
43