To Control The Volume; Using Non-Preset Remote Control Operations - Learning Function - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

Note
The remote control signals may be different for
some components or functions. In this case,
program the remote control signals with the
learning function (see page 19). Note, however,
that components and functions that do not
support the remote control of infrared signals
will not work with this Commander.

To control the volume

Press the VOLUME +/– buttons to
control the volume, and the MUTING
button to mute. When you select a visual
component, the TV's volume will be
controlled, and when you select an audio
component, the amplifier's volume will
be controlled. You can change this setting
also (page 29).
Notes
• If you have programmed any signal for the
VOLUME or MUTING button for any
component using the learning function (page
19), that signal will be transmitted instead of
controlling the volume of the TV or amplifier
once you select that component.
• If you have programmed any signal for the
VOLUME +/– buttons or the MUTING
button of TV or AMP using the learning
function, that signal will be also transmitted
when you select another component.
However, if you have programmed any
signal for the VOLUME +/– buttons or the
MUTING button of another component, that
signal will be transmitted only after you
select that component.
• If you have assigned another component to
the TV or AMP button, the volume of the TV
or amplifier cannot be controlled even when
you select other components.
Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components or
functions, use the following "learning"
procedure to "teach" any of the
programmable buttons and keys to
operate the functions of another remote
control. You can also use the learning
function to change the signal of
individual keys and buttons after setting
the component code number (page 12).
To "teach" to the Component Select
buttons or Label keys, see page 45.
To "teach" to the SYSTEM CONTROL
buttons or Label keys, see page 49.
Note
Some specific remote control signals may not
be learned.
TV STB VCR DVD
SYSTEM CONTROL
1 2 3 MORE
VOLUME
OK
MENU EXIT
CD AMP OTHER
COMMANDER
TIMER LIGHT OFF
CHANNEL
MUTING RECALL
Continued
5
3
4
8
2
19