Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual page 35

To clear programmed commands
for a specific SYSTEM CONTROL
button or corresponding Label key
1
While pressing COMMANDER
OFF, press MUTING.
COMMANDER
MUTING
OFF
"SET" appears on the Mode Display
key.
2
Press the Mode Display key (SET)
once to display "RESET" on one
of the Label keys on the display.
3
Press the RESET key.
RESET
"RESET" appears on the Mode
Display key.
4
Press the SYSTEM key.
SYSTEM
System numbers appear on the Label
keys.
To change Label keys, press the
MORE button repeatedly until you
obtain the desired system number.
Each time you press the MORE
button, the display of the Label keys
changes as in Step 3 on page 32.
5
Press the SYSTEM CONTROL
button (1, 2 or 3) or the Label key
(SYSTEM4 - SYSTEM15) of which
programmed commands you
want to erase.
The selected system number is
displayed on the left Label key.
6
Press the YES key.
YES
Continued
35