Appendix; Table Of Preset Functions - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

Appendix

Table of Preset
Functions
Note
There may be some components or functions
that cannot be operated with this Commander.
TV
KEY DISPLAY
POWER
1 – 9, 0, ENTER
INPUT
DISPLAY
SLEEP
MAIN/SUB
ANT/SW
WIDE
MENU
OK
PIP ON/OFF
PIP CH+/–
PIP INPUT
PIP MOVE
PIP STILL
PIP SWAP
88
FUNCTION
To turn the power on/off
To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
To change the input mode
To display the current
channel on TV
To operate SLEEP function on
the TV (works only for a TV
with SLEEP function)
To switch the sound of the
duplex broadcast
To switch the multiplex
antenna input
To switch to WIDE
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To enter the selection of the
MENU display
To turn on/off the "window"
picture
To change the TV channel in
the "window" picture
To change the input mode of
the "window" picture
To move the location of the
"window" picture
To freeze the "window"
picture
To swap the "window"
picture
KEY DISPLAY FUNCTION
CHANNEL +/– Channel up: +
Channel down: –
RECALL To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of
the TV's manufacturer
VOLUME +/– Volume up: +
Volume down: –
MUTING To mute the volume on the
TV. Press again to turn
muting off.
VIDEO1 To select the input source:
VIDEO 1
VIDEO2 To select the input source:
VIDEO 2
VIDEO3 To select the input source:
VIDEO 3
VIDEO4 To select the input source:
VIDEO 4
TV TUNER To return to the TV (to reset
the external input)
NORMAL To return the picture and
sound quality to the standard
status
PIP AUDIO To change the sound of the
main display and sub display
PIP OFF To turn off the "window"
picture
AU MODE To select the sound adjusting
mode
PIC MODE To select the picture adjusting
mode
CAPTION To display the CRT screen
subtitle