Programming A Frequently Used Key Operation For System Control Buttons Or Label Keys - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

"COPY" appears on the Mode
Display key.
In this case, "DVD c c VCR" flashes
on the Label keys and moving finishes
with a beep sound. And the keys for
VCR appears.
6
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
To return to the original setting
Follow steps in "To clear all signals
learned for a specific component", page
26.
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons or
Label Keys
In addition to their original System
Control functions (see page 31), SYSTEM
CONTROL 1, 2 or 3 buttons or SYSTEM 4
- 15 Label keys can be programmed to
"learn" any remote control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a "one-
touch" button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
3
TV STB VCR
SYSTEM CONTROL
1 2
OK
MENU EXIT
DVD CD AMP OTHER
COMMANDER
TIMER LIGHT OFF
3 MORE
VOLUME CHANNEL
MUTING RECALL
Continued
4
6
2
49