Adjusting The Backlight Of The Display Window - Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual

Integrated remote commander
Hide thumbs Also See for RM-AV3000 Operating Instructions (primary manual):
Table of Contents

Advertisement

Setting the Automatic-Off Time of
the Display Window (continued)
6
Press the (+) or (–) key to change
the Automatic-Off time of the
LCD display window.
You can adjust from 1 minute to 30
minutes.
Each time the (+) key is pressed, the
minute increases by one.
Each time the (–) key is pressed, the
minute decreases by one.
For example, "2min" on the Label key
means 2 minutes.
Note
When you set the Automatic-Off time of the
display window longer than 10 minutes
(factory setting), the battery life may be
short.
7
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
74
Adjusting the Backlight
of the Display Window
The Commander is preset at the factory
to brighten backlight, and to switch off
the backlight automatically if you do not
operate for more than 10 seconds. To
change this setting, perform the
following procedure.
You can adjust the backlight Automatic-
Off time (from 1 second to 60 seconds in
the units of 1 second), the brightness
(bright or dim) and the setting of the
buttons to lighten the Display Window.
3
TV
STB
VCR
SYSTEM CONTROL
1
2
OK
MENU
EXIT
1
While pressing COMMANDER
OFF, press MUTING.
COMMANDER
MUTING
OFF
"SET" appears on the Mode Display
key.
DVD
CD
AMP
OTHER
COMMANDER
TIMER
LIGHT
OFF
3
MORE
VOLUME
CHANNEL
MUTING
RECALL
2
4-9
10
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm av3000 - universal remote control

Table of Contents