Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual page 57

5
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
To receive the data of a
Component Select button or key
from another remote
commander
1
Perform Steps 1 and 2 on pages
56.
2
Press the COMPO key.
COMPO
"COMPO x" appears on the Mode
Display key.
3
Press the Component Select
button to which you want to
assign the data.
Or press the Label key to which you
want to assign the data. To change the
Label keys, press the OTHER button
repeatedly.
TV
The selected component name
appears on the left Label key.
4
Press the ENTER key.
During receiving the data, "c c c c"
flashes.
When the data has been successfully
received, the selected component
name appears on the right Label key.
Continued
57