Removing And Fitting The Control Cylinder - DURKOPP ADLER 577 Series Manual

8.5 Removing and fitting the control cylinder

1
40
7
9
8
10
2
3
4
Removal:
–
Lock the sewing basket in the upper position.
–
Remove the shock absorber 1.
–
Remove air hoses 2 and 3.
–
Remove safety ring 4.
–
Remove the control cylinder by hand completely and pull out the
bolt 5.
–
Loosen the supporting bolt 6.
–
Hand out the spring 7.
–
Loosen the screw 8 and remove the guide 9.
–
Dismount the bearing bush 10 and remove it together with the
control cylinder.
–
Remove the control cylinder.
Fitting:
–
For fitting proceed in an inverted sequence.
11
6
5