Keys On The Control Panel - DURKOPP ADLER 577 Series Manual

5.2

Keys on the control panel

Key
P
E
+
-
Key 1
Key 2
Key 3
20
1
Function
Call up/end programming mode
(Only in the programming mode)
Displaying the parameter value / Rendering the parame-
ter value for a change
Quitting a parameter entry with a simultaneous change to
the next parameter
Direct function:
Increase the speed
In programming mode:
Change to the next parameter of the parameter list
Increase the displayed parameter value / Switch on the
displayed parameter ("on")
Direct function:
Reduce the speed
In the programming mode:
Return to the previous parameter of the parameter list
Reduce the displayed parameter value / Switch off the
displayed parameter ("oFF")
Soft start
Double cycle
Only when the Programming mode and "F - 020" are
set to "on" lifting/lowering the sewing cage
2 3 4 A B
Adjustments
on / oFF
on / oFF