Operation - Bruno OUTDOOR ELITE CRE-2110E Operator's Manual

OPERATION

The CRE-2110E includes a "soft-start"
feature which prevents the unit from moving
abruptly the instant the UP/DOWN switch is
pressed.
Press and hold the switch for a moment to
begin the gentle acceleration of the stairway
elevator to operating speed.
Depressing and holding the rocker
switch will cause the carriage to move
until the carriage stops automatically at
the upper or lower end of the stair rail,
or until the switch is released.
©B Bruno Independent Living Aids, Inc.
STANDARD SWIVEL SEAT
1. To remove the top seat cover, loosen the
2. Raise and hold the seat swivel lever.
3. Rotate the seat to the transfer position.
4. Lower the seat, footrest and armrests.
5. Position yourself in the seat.
6. Fasten the positioning belt.
7. Using the seat swivel lever, rotate the seat
8. Position both feet securely on the footrest and
9. Turn the armrest key switch to ON.
10. Press and hold the rocker switch (located
11
®
draw string (see photo page 8) and pull up
on the cover.
to the "riding" position (with your back to
the stairway wall).
A safety switch prevents operation of the
CRE-2110E unless the seat is locked in position
at right angles to the rail (the "riding" position).
place your arms on the armrest cushions.
on the front edge of one of the armrests) to
travel UP / DOWN the rail.
CRE-2110E Operator 04-02-2018