Bruno OUTDOOR ELITE CRE-2110E Operator's Manual page 17

BATTERY CHARGER FUSE REPLACEMENT
fuse
charger power switch
©B Bruno Independent Living Aids, Inc.
If the charger is subject to a power line
surge, the AC input fuse may blow. Refer to
the illustration to the left for fuse location.
To replace fuse:
1. Turn OFF the battery charger power
switch.
2. Remove power cord from wall outlet.
3. Twist the fuseholder cap and pull out to
remove the fuse.
4. Replace with the same size and type
fuse: (Bussmann GMD-2A or equivalent)
2A, Slo-Blow, 5 x 20mm.
17
®
CRE-2110E Operator 04-02-2018