OPERATION
The SRE-2010E includes a
"soft-start" feature which
prevents the unit from moving
abruptly the instant the
UP/DOWN switch is pressed.
Press and hold the switch for
a moment to begin the gentle
acceleration of the stairlift to
operating speed.
Depressing and holding the
rocker switch will cause the
carriage to move until the
carriage stops automatically at
the upper or lower end of the
stair rail, or until the switch is
released.
©BRUNO
1. Raise the canopy (if necessary).
2. Raise and hold the seat swivel lever.
3. Rotate the seat to the transfer position.
4. Lower the seat, footrest and armrests.
5. Position yourself in the seat.
6. Fasten the positioning belt.
7. Using the seat swivel lever, rotate the seat to
the "riding" position (with your back to the
stairway wall).
A safety switch prevents operation of the
SRE-2010E unless the seat is locked in position
at right angles to the rail (the "riding" position).
8. Position both feet securely on the footrest
and place your arms on the armrest cushions.
9. Turn the armrest key switch to ON.
10. Press and hold the rocker switch (located
on the front edge of one of the armrests)
to travel UP / DOWN the rail.
11
SRE-2010E Operator 04-02-2018