Vacation And Long-Term Storage - Bruno OUTDOOR ELITE CRE-2110E Operator's Manual

Curve custom curved rail stairlift
Hide thumbs Also See for OUTDOOR ELITE CRE-2110E:
Table of Contents

Advertisement

VACATION AND LONG-TERM STORAGE

If the CRE-2110E will remain unused for an extended period of time:
• turn off the circuit breaker (ON/OFF switch) located on the stairlift carriage;
• remove all keys (remotes, armrest keyswitch) and store in a safe location;
• have the batteries removed and stored according to battery manufacturer's instructions;
• turn off the battery charger power switch, unplug it from the wall outlet and store indoors;
• place the cover over the seat and tighten the drawstring.
To put the CRE-2110E back into service:
• have the batteries reinstalled in the CRE-2110E;
• loosen the seat cover drawstring and remove the cover;
• clean dirt and moisture from the seat and carriage;
• have a fresh coat of grease applied to the gear rack;
• insert the keys in the armrest keyswitch and remotes;
• turn on the circuit breaker (ON/OFF switch) located on the stairlift carriage;
• reconnect the battery charger to an AC outlet and turn on the charger;
• run the CRE-2110E up and down the rail several times to verify correct operation.
NOTE: The batteries may require recharging before normal use if the stairway elevator
remained unused for an extended period of time.
To recharge, simply turn on the circuit breaker, reconnect the charger to the wall outlet
and wait until the charger LED's indicate that the batteries are fully recharged.
©B Bruno Independent Living Aids, Inc.
21
®
CRE-2110E Operator 04-02-2018

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents