Operation; Standard Swivel Seat - Bruno CRE-2110 Operator's Manual

OPERATION

The CRE-2110 includes a
"soft-start" feature which
prevents the unit from moving
abruptly the instant the
UP/DOWN switch is pressed.
Press and hold the switch for
a moment to begin the gentle
acceleration of the stairway
elevator to operating speed.
Depressing and holding the
rocker switch will cause the
carriage to move until the
carriage stops automatically at
the upper or lower end of the
stair rail, or until the switch is
released.
©2010,2009 Bruno Independent Living Aids, Inc.®

STANDARD SWIVEL SEAT

1. Position yourself in the seat.
2. Fasten the positioning belt.
3. Raise and hold the seat swivel lever.
4. Rotate the seat so that you are at right
angles to the rail (with your back to the
stairway wall).
5. Release the seat swivel lever to secure the
seat in that position.
A safety switch prevents operation of the
CRE-2110 unless the seat is locked in
position at right angles to the rail (the
"riding" position).
6. Position both feet securely on the footrest and
place your arms on the armrest cushions.
7. Press and hold the rocker switch (located
on the front edge of one of the armrests) to
travel UP / DOWN the rail.
10
CRE-2110 Operator 08-16-2010