Charging - Bruno OUTDOOR ELITE CRE-2110E Operator's Manual

Curve custom curved rail stairlift
Hide thumbs Also See for OUTDOOR ELITE CRE-2110E:
Table of Contents

Advertisement

CHARGING

Keep the batteries charged to ensure optimal operation
of your CRE-2110E.
The batteries are charging whenever the carriage is parked
tightly against the brackets at either end of the rail. When-
ever the carriage does not contact the upper or lower charge
bracket, the batteries will slowly discharge.
Failure to keep the batteries charged, or allowing them
to fully discharge, will significantly shorten the life of the
batteries.
Therefore, when the stairway elevator is not in use, park the
carriage at either end of the rail, making sure it touches the
charge bracket contacts.
LED
The green LED on the carriage confirms that the unit is
charging.
If your application prevents parking the carriage at one or
glowing LED = parked at
the other end of the stairs (for example, a door at the top of
charge station
the stairs), ALWAYS use the call/send transmitter to move
the carriage to the end of the rail where the carriage can
contact the charge bracket. Using the transmitter, call it
back to the other end of the stairs when needed.
15
©B Bruno Independent Living Aids, Inc.
CRE-2110E Operator 04-02-2018
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents