Bruno OUTDOOR ELITE CRE-2110E Operator's Manual page 18

MAINTENANCE
NOTE: Scratches to paint during handling,
installation or normal use should be
retouched using paint available through
the Bruno Technical Service Department.
Inspect painted surfaces for scratches
upon receipt, after installation, and once
a year. Failure to touch up scratches that
cause limited rusting may void the
warranty.
rear of transmitter
rear of transmitter
with 1 rear cover
removed
©B Bruno Independent Living Aids, Inc.
Your CRE-2110E is designed to provide many years of reliable
service with minimal maintenance.
For best service life:
• Keep the rail channel clean and free of debris.
• Always park the carriage at one end of the rail so that the
batteries charge when the elevator is not in use.
• Keep the battery charger plugged into a live outlet at all
times.
• At least once a year, have the elevator examined, cleaned
and lubricated by a qualified, authorized Bruno service
technician.
TRANSMITTER BATTERY REPLACEMENT
• Detach the transmitter from the wall.
• Remove the rear cover (see left).
• Remove the old battery and replace with a new one.
One 9V battery required.
• Re-mount the transmitter rear cover.
• Reposition the transmitter on the wall.
9V battery
®
Change batteries annually.
18
CRE-2110E Operator 04-02-2018