Axis AKA/G Series User Manual page 56

56
__________________________________________________________________________________________________________________
Scale Computer: without response,
 Scale turning on / off (calling
Computer Scale: S S CR LF (53h 53h 0Dh 0Ah),
Scale Computer: without response,
 Entering to special function menu (calling MENU key press):
Computer Scale: S F CR LF (53h 46h 0Dh 0Ah),
Scale Computer: without response,
 Setting low threshold value (option):
Computer Scale: S L D1...DN CR LF (53h 4Ch D1...DN 0Dh 0Ah)
D1...DN – threshold value, maximum 8 characters („-" – negative value, digits, dot – decimal
separator), number of digits after dot should be the same as on scale display,
Scale Computer: without response,
 Example:
 in order to set low threshold 1000g in scale B1.5 (d=0.5g) the following order should be sent:
S L 1 0 0 0 . 0 CR LF (53h 4Ch 31h 30h 30h 30h 2Eh 30h 0Dh 0Ah),
 in order to set low threshold 100kg in scale B150 (d=50g) the following order should be sent:
S L 1 0 0 . 0 0 CR LF (53h 4Ch 31h 30h 30h 2Eh 30h 30h 0Dh 0Ah),),
 Setting high threshold value (option):
Computer Scale: S H D1...DN CR LF (53h 48h D1...DN 0Dh 0Ah),
D1...DN – threshold value (see )
Scale Computer: without response.
Connecting cable WK-1 (scale – computer / 9-pin interface):
SCALE
Connecting cable WD-1 (connects printer with scale):
SCALE
AXIS C-001 printer internal switches setting:
SW-1 SW-2
on off
USER MANUAL
key press):
I/
SW-3 SW-4 SW-5 SW-6 SW-7 SW-8
on off off
COMPUTER
PRINTER
on off off