Axis AKA/G Series User Manual page 53

_________________________________________________________________________________________________________________
TP/PREVIEW
Defective
Disqualifying
Average
Average qual.
Result
- printout F1-end F2–Reset CLR-exit
TP/PREVIEW
Defective
Disqualifying
Average
Average qual.
Result
- print F1-end F2–Reset CLR-exit
APPLICATIONS
Threshold
TP (packaged goods)
...
Exit
THRESHOLD
1. Activation
2. Zero threshold
3. MIN threshold
4. MAX threshold
5. Mode:
6. Printout
7. Shortcut:
8. Exit
USER MANUAL
: 0
: 0
: 55.78 g
: 50.00 g
: POSITIVE
: 0
: 0
: 55.78 g
: 50.00 g
: INTERRUPTED
0.010 g
50.0000 g
59.0000 g
<signaller><impulse>
-
F2 (Reset) key erases all measurements and starts
new control.
F1 (end) key enables instant control end and
displaying results.
Using F1 (end) key before making required quantity
of measurements causes to end control and
displays actual results insufficient to evaluate batch.
In practice it is good to use packing goods control
application together with Threshold application,
which signalize thresholding MIN and MAX values.
This will allow to omit mistakes during big amounts
of measurements and to connect goods control with
selection (full control).
When application is activated default threshold
values are:
- MIN = Qn
- MAX = QN+2T1
User can change the values. Threshold app must
be activated before goods control.
53