Setup - Axis AKA/G Series User Manual

____________________________________________________________________________________________________________________

15. Setup

Setup consists all options used for setting balance's way of working:
MENU
1. Applications
2. Setup
3. Info
4. Exit
1. Menu
2. Calibration
3. Auto-zeroing
4. Unit
5. Interface
6. Print setup
7. LCD settings
8. Language
9. Time&date
10. Keyboard
11. Analog output
12. Speed
13. Firmware update
14. Defaults
14. Exit
Attention:
Using Defaults option doesn't change basic metrological balance parameters like: sensitivity, linearity (if the
calibration switch isn't moved), but all other settings that have influence on balance's work and
communication with other devices can be changed and need resetting by User.
USER MANUAL
SETUP
Menu – applications selection to user's
personalized menu,
Calibration – balance's calibration,
Auto-zeroing – automatic zero indication hold
when pan is unloaded,
Unit – weight unit selection,
Interface – setting serial ports,
Print setup – data selection for transmission
(printout),
Time&date – inscribing actual date and time,
Keyboard – keys options,
Analog out – 4-20mA (0-10V) out
configuration (option),
Speed – weighing speed selection,
Firmware update – firmware actualization
(only for service),
Defaults – back to factory settings,
Exit.
17