Table of Contents
Advertisement
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Maverick MK3 Profile comes with a bracket to which you can attach a mounting clamp directly.
Mounting clamps are sold separately. Make sure the clamps are capable of supporting the weight of this
product. Use at least two mounting points per product. For the CHAUVET Professional line of mounting
clamps, go to http://www.trusst.com/products.
Mounting Diagram
Mounting Clamp (x2)
Omega Bracket (x2)
Page 6 of 33
for weight information.
Maverick MK3 Profile User Manual Rev. 2
Setup
Safety Cable
Advertisement
Table of Contents
