6. Procedure
6.1 Practical use
For information on how to process the material please refer to the material Instructions
for Use of the SR Ivocap System.
10
Compressed air
6 bar
Water level
Flowing cold water
The most important steps:
Injection - 5 minutes
1
Polymerization – 35 minutes in
2
boiling water (as of the beginning
of boiling)
Cooling in a cold-water bath –
3
at least 30 minutes; the injection
Pressure apparatus
pressure must be maintained for at
least 20 minutes thereof
Capsule
Flask
Mark for water level