Product Description; Hazardous Areas And Safety Equipment; Functional Description - Ivoclar Vivadent SR Ivocap Operating Instructions Manual

3. Product Description

3.1 Components
The SR Ivocap basic assortment consists
of the following components:
• Pressure apparatus
• Flask
• Clamping frame
• Capsule plunger
• Investment aid
• Funnel
• Compression spring
• Allen key
Furthermore, the following accessories
are required (not contained in the
assortment):
• Cap Vibrator (Ivoclar Vivadent)
• Polymerization bath
(various manufacturers)
• Hydraulic press
(various manufacturers)
• Plastic floaters (Ivoclar Vivadent)
3.2 Hazardous areas and
safety equipment
Description of the risk areas of the
SR Ivocap System:
Hazardous area
Flask and clamping frame
Splash water from the
polymerization bath
See also Chapter 2.

3.3 Functional description

The SR Ivocap System is an injection
technique which has been especially
developed to compensate curing
shrinkage. Controlled polymerization
allows shrinkage of the material during
polymerization to be compensated by
inflowing material. The SR Ivocap
injection technique, therefore, permits
the fabrication of high quality products
with outstanding physical properties.
Type of risk
There is a burn hazard if the equipment
is removed from the boiling water
without protective gloves.
There is a burn hazard if no protective
clothing and gloves are worn.
3.4 Accessories
• Cap Vibrator (Ivoclar Vivadent)
• Wall bracket for 4 pressure apparatus
(e.g. from BDT)
• Polymerization bath (e.g. from BDT)
• Hydraulic press
(various manufacturers)
• Various accessories (BDT)
Address of BDT:
BDT GmbH, Industriestrasse 27,
D-77656 Offenburg
(Germany)
7